CMVision IR30 WideAngle 60-80 Degree 30pc Power LED 100feet Long Range Indoor/ourdoor IR Array Illuminator
Cmvision IR30 Wideangle Distance Up to 100 Feet 30pc Power LED Ir Illuminator
Only sensitive with Sony or Sharp CCD Camera and lots of IP CMOS camera do not work with 850nm wavelength.
Allow your camera to see in total darkness. This is a simple and effective way of discreetly illuminating an area (up to 100 feet in distance) where monochrome cameras are operating in the dark. Simply power the unit and position it in the direction of images being viewed and you will turn night into day for the camera. Since IR-Illumination can't be perceived or seen by the human eye it is perfect for covert applications or applications where you don't want visible lighting. This high quality IR-Illuminator has a weatherproof aluminum housing for both indoor or outdoor use.
Feature
- Automatic CDS power control auto-powers unit only in low light situations for detecting & monitoring
- Built-in 30 high power IR LEDs Array, Support 12V DC input voltage,Ideal for outdoor/Indoor IP65 case
- Allow monochrome camera to see in total darkness,Install and use in minutes
- Photo sensor for Sony or Sharp CCD Camera,IR range upto 100 feet (30 meters) 850nm wave length
- Perfect Portable IR Illuminator for Night Vision
Specification
|
TYPE:
|
Outdoor / Indoor
|
|
POWER SOURCE:
|
DC 12V
|
|
POWER CONSUMPTION:
|
8W
|
|
VIEW ANGLE:
|
60-90degree
|
|
POWER ON:
|
Activate Lux 10 Lux
|
|
IR LEDS:
|
30 PCS
|
|
INFRARED RANGE:
|
up to 20-30 M(Night Vision)
|
|
INFRARED WAVELENGTHS:
|
850nm
|
|
WEATHERPROOF:
|
IP65
|
|
NET WEIGHT:
|
100g
|
|
STORAGE TEMPERATURE:
|
-30~+60℃ RH95% Max
|
|
OPERATING TEMPERATURE:
|
-10~+50℃ RH95% Max
|
|
MANUFACTURER WARRANTY:
|
1 Year Limited Warranty
|
|
INSTALLATION:
|
According to physical construction and view of infrared lights,infrared lights should be installed on wall,bracket (or PTZ controller).In order to make infrared lights effective,best time for installation would be night time.The goal is to adjust
|
|
CONNECTION:
|
The illuminator has a wired power input socket.The center of the socket is positive pole. The socket is connected to 12V DC power supplier.
|
|
NOTES:
|
To ensure longer lifetime and more efficient,infrared light must be used with stable 12V DC power source.The voltage range should bewithin 12V 5%,if voltage is too high the infrared lights will be damaged,if voltage is too low,the infrared lights
|
Manual:
Please click the link to view product manual
